How to Boot Up in Safe Mode in Windows 10

Welcome to our guide on how to boot up in safe mode in Windows 10! A lot of computer problems can be solved or at least diagnosed in safe mode, so it’s a handy tool to have in your troubleshooting arsenal. In this article, we’ll walk you through 12 simple steps to boot up your Windows 10 device in safe mode. We’ll also share some tips and tricks to make sure you get the most out of this feature.

Steps

Step 1: As your computer is starting up, press and hold the Shift key

When you turn on your Windows 10 device, wait until the Windows logo appears on your screen. Then press and hold the Shift key on your keyboard and keep holding it until the login screen appears.

Step 2: Click Restart while holding down the Shift key

Once you’re on the login screen, click the Power button in the bottom right corner, then hold down the Shift key and click Restart.

Step 3: Choose Troubleshoot > Advanced options > Startup Settings

After your device restarts, you’ll see some options. Choose Troubleshoot > Advanced options > Startup Settings.

Step 4: Click Restart

Click the Restart button to proceed.

Step 5: Choose the Safe Mode option you want to use

Once your device restarts again, you’ll see a list of safe mode options to choose from. Use the number keys on your keyboard to choose the safe mode option you want to use.

Step 6: Wait for Windows 10 to boot up in Safe Mode

After you’ve chosen your safe mode option, Windows 10 will boot up in safe mode. This may take a few minutes, so be patient.

Step 7: Troubleshoot the problem

Once you’re in safe mode, you can begin to troubleshoot the problem you were experiencing. You can try uninstalling recently installed software or drivers, running a virus scan, or performing a system restore.

Step 8: Restart your computer normally

After you’ve finished troubleshooting and you’re satisfied that the problem has been resolved, you can restart your computer normally. Just go to the Start menu, click the Power button, and choose Restart.

Step 9: Press the Shift key and hold it down

As soon as you see the Windows logo on your screen, press and hold the Shift key on your keyboard.

Step 10: Click Restart while holding down the Shift key

While still holding down the Shift key, click the Power button in the bottom right corner, then hold down the Shift key and click Restart.

Step 11: Choose Troubleshoot > Advanced options > Startup Settings

Once your device restarts, choose Troubleshoot > Advanced options > Startup Settings.

Step 12: Click Restart

Click the Restart button to proceed. Your device should now boot up normally.

Explanation

Booting up in safe mode is a way to start your Windows device with only the essential drivers and services needed to run the operating system. This means that any third-party software or drivers that might be causing problems won’t be loaded, and you can troubleshoot the issue without interference.

Safe mode is also useful for diagnosing hardware problems. If your computer is having trouble starting up normally, safe mode can help you identify which hardware component is causing the issue.

Tips and Tricks

1. Make sure to create a restore point before making any changes

Creating a restore point before making any changes to your system can help you revert back to a stable state if something goes wrong. To create a restore point, go to Control Panel > System and Security > System > System Protection.

2. Use the System Configuration tool to boot up in safe mode more quickly

If you anticipate having to boot up in safe mode frequently, you can use the System Configuration tool to configure your computer to always boot up in safe mode. To do this, open the Run dialog box by pressing Windows key + R, then type msconfig and hit Enter. In the System Configuration window, go to the Boot tab and check the Safe boot box.

3. Try using Safe Mode with Networking

If you need to troubleshoot an internet connectivity issue, Safe Mode with Networking allows you to connect to the internet using only the essential networking drivers and services.

4. Use Safe Mode to fix driver issues

If you’re experiencing problems with a driver, Safe Mode can help you uninstall it or reinstall a working version.

5. Use Safe Mode to troubleshoot startup programs

If you suspect that a particular program is causing your computer to start up slowly, you can use Safe Mode to identify the culprit and disable it.

6. Boot up in Safe Mode using the Windows 10 installation media

If your computer won’t start up normally, you can use the Windows 10 installation media to boot up in Safe Mode. Insert the installation media into your computer and boot from it. On the Install Windows screen, choose your language and other preferences, then click Next. Click on Repair your computer, then Troubleshoot > Advanced options > Startup Settings.

7. Use Safe Mode to diagnose hardware problems

If your computer is having trouble starting up, booting up in Safe Mode can help you diagnose hardware problems. Try removing any recently installed hardware components or running a system diagnostic tool.

8. Use System Restore to undo changes made in Safe Mode

If you made changes to your system while in Safe Mode and now want to undo them, you can use System Restore to revert back to a previous restore point.

9. Try booting up in Safe Mode if your computer is freezing or crashing

If your computer keeps freezing or crashing, booting up in Safe Mode can help you identify the cause of the problem.

10. Use Safe Mode to uninstall software that won’t uninstall normally

If you’re having trouble uninstalling a program, Safe Mode can help you remove it. By starting your computer in Safe Mode, you can prevent the program from running and make it easier to uninstall.

.

Advantages and Disadvantages of Booting up in Safe Mode Windows 10

Advantages:

1. Troubleshoot issues: Safe Mode is a great way to troubleshoot any issues that may arise in Windows 10.

2. Remove Malware: Safe Mode can be used to remove malware and any other viruses that may be present on your computer.

3. Uninstall faulty updates: If a faulty update has been installed, you can use Safe Mode to uninstall it and fix the issue.

4. System updates: Safe Mode can be used to install system updates that may have caused issues when installed in the normal mode.

5. Simpler interface: The interface in Safe Mode is much simpler and easier to navigate, which can be helpful for those who are not tech-savvy.

6. Increased stability: Booting up in Safe Mode can increase the stability of your system by disabling unnecessary startup programs and drivers.

7. Diagnose hardware issues: Safe Mode can help diagnose hardware issues by running the system on a basic level.

8. Restore system: Safe Mode can be used to restore your system to an earlier point in time if needed.

9. Faster boot-up: Windows 10 boots up faster in Safe Mode as it only loads necessary drivers and services.

10. User control: Safe Mode gives users more control over their system as they can choose what programs and services they want to run.

Disadvantages:

1. Limited functionality: Safe Mode severely limits the functionality of your computer.

2. No Internet access: You cannot access the internet in Safe Mode, which can be a problem when trying to troubleshoot network issues.

3. No sound or graphics: In Safe Mode, the computer may revert to basic graphics and sound drivers, which may not be suitable for advanced usage.

4. No external devices: Many external devices such as printers, scanners, and cameras may not work in Safe Mode.

5. Limited updates: Windows 10 will have limited access to updates in Safe Mode.

6. Non-permanent fix: Safe Mode is a temporary fix, and issues may reoccur once you switch back to regular mode.

7. Can be difficult to enter: It may be difficult to enter Safe Mode if your computer is already experiencing issues.

8. No multi-tasking: You cannot run multiple programs simultaneously in Safe Mode.

9. Shortcuts not available: Many keyboard shortcuts may not work in Safe Mode.

10. Advanced users only: Safe Mode is recommended for advanced users only as it requires a certain level of technical knowledge to navigate properly.

FAQ

1. What is safe mode in Windows 10?

Safe mode is a diagnostic mode in Windows 10 that starts your computer with a minimal set of drivers and services. It is used to troubleshoot and fix problems that may be caused by a faulty driver or software.

2. How do I boot up in safe mode?

To enter safe mode, you need to restart your computer and press the F8 key repeatedly before the Windows logo appears. However, this method no longer works in Windows 10. Instead, you need to follow specific steps to access safe mode.

3. What are the steps to boot up in safe mode?

1. Click on the Windows icon in the bottom left corner of your screen

2. Click on “Settings”

3. Click on “Update & Security”

4. Click on “Recovery”

5. Under “Advanced Startup”, click on “Restart now”

6. Select “Troubleshoot”

7. Select “Advanced options”

8. Select “Startup Settings”

9. Click on “Restart”

10. Press the number key corresponding to “Enable Safe Mode”

4. Can I still access safe mode if my computer won’t boot?

Yes, if your computer won’t boot, you can still access safe mode using the Windows 10 installation media.

5. What is the difference between safe mode and normal mode?

Safe mode starts your computer with a minimal set of drivers and services, while normal mode loads all the drivers and services required to run Windows 10. Safe mode is used to troubleshoot and fix problems, while normal mode is used for regular use.

6. Can I access the internet in safe mode?

Yes, you can access the internet in safe mode. However, some features may be limited, and you may experience slower performance.

7. Can I install new software in safe mode?

No, you cannot install new software in safe mode. Safe mode has limited functionality, and some features may be disabled.

8. How long does it take to boot up in safe mode?

Booting up in safe mode usually takes the same amount of time as booting up in normal mode. However, depending on the cause of the problem, troubleshooting and fixing the issue may take longer.

9. Can I access my files in safe mode?

Yes, you can access your files in safe mode. However, some applications may not be available, and some features may be disabled.

10. Will safe mode erase my data?

No, safe mode will not erase your data. It is a diagnostic mode that starts your computer with a minimal set of drivers and services to troubleshoot and fix problems.

11. Can I print in safe mode?

Yes, you can print in safe mode. However, some printers may not be available, and some printing features may be limited.

12. What should I do if I can’t access safe mode?

If you can’t access safe mode, you may need to seek the help of a professional technician or contact the manufacturer for support.

13. What are some common problems that can be fixed in safe mode?

Some common problems that can be fixed in safe mode include driver issues, software conflicts, malware infections, and startup errors.

How to Boot Up in Safe Mode Windows 10

Safe Mode is a diagnostic mode in Windows 10 that can help you troubleshoot various issues, such as software conflicts and hardware issues. When you boot up in Safe Mode, only a limited set of files and drivers are loaded, which can help you identify the cause of the problem.

So, if you’re having issues with your Windows 10 PC, and you want to boot up in Safe Mode, here’s how you can do it:

Conclusion

Booting up in Safe Mode is a simple but effective way to troubleshoot various issues in Windows 10. By following the steps outlined in this article, you can easily boot up in Safe Mode and start diagnosing the problem.

Closing

We hope this guide has helped you learn how to boot up in Safe Mode Windows 10. If you have any further questions or concerns, feel free to reach out to us. Thank you for reading!